CONTROL SURFACES
The control surfaces are operated by a conventional
pistol-grip stick and adjustable rudder pedals.Elevators
and rudder trim tab controls are on the left side of the
cockpit forward of the flap control lever. The rudder
trim tab control is a round knob, marked in degrees
beginning with zero in the neutral position, which turns
in either direction.
|
The elevator trim tab is also a round knob, similarly
calibrated. It is located in a vertical position below
the rudder trim tab control and is controlled by a small
hand crank. The flap controls are on the left side of the
cockpit above the landing gear handle.
The aileron trim tab must be
adjusted manually on the ground, except on some models
which have an electric aileron trim tab control.
|